CCTV & Security
How to View Your CCTV on Your Phone Remotely (Safely)
Short answer
You need a recorder or camera connected to the internet, the manufacturer's mobile app and the device's cloud or P2P serial number or QR code. Add the device in the app, enter the password and you can watch live and play back footage. Use strong passwords, update firmware and avoid exposing the recorder directly to the internet.
Steps
- Connect the recorder to your router by network cable and confirm it has internet.
- Change the default password to a long unique one.
- Enable the cloud or P2P option in the recorder menu.
- Install the manufacturer app on your phone.
- Scan the recorder QR code or enter its serial number, then log in.
- Check live view, playback and notifications.
Keep it secure
- Do not forward ports straight to the recorder unless an installer sets up proper protection.
- Update recorder and camera firmware.
- Share access with named users, not one shared password.
- Remove access for former staff.
If it will not connect
Check the router, the internet line and recorder network settings. Our CCTV troubleshooting guide covers common causes. We can set this up as part of CCTV installation.
Common questions
Does remote viewing use a lot of data?
Live viewing uses data. Use sub-stream or lower quality on mobile data to save it.
Can I view without Wi-Fi at home?
Yes. The recorder needs any internet line, such as fibre or a mobile router.
Why is my live view slow?
Usually slow upload speed at the site or a weak mobile signal. Lowering the stream quality helps.
