CCTV & Security

Electric Fence Not Working? Common Faults and How to Fix Them

By Ultrateq Systems · Updated

Short answer

Most electric fence faults come from poor earthing, a broken or shorted wire, vegetation touching the line, cracked insulators or a failed energiser or battery. Check the energiser and power first, then walk the fence with a tester to find where the voltage drops. Call a technician if the energiser itself is faulty.

Common faults

SymptomLikely causeCheck
No pulse from the energiserNo power, tripped supply or faulty unitCheck mains or battery and the energiser display
Voltage low along the whole fencePoor earthing or a heavy shortCheck earth rods and look for contact with plants or metal
Voltage drops past a pointBroken wire or loose jointWalk the fence and check joints
Alarm sounding oftenVegetation, birds, loose wires or low voltageClear growth and re-tension wires
Shock too weakDry soil, bad earthAdd or improve earth rods

Safety

  • Switch off the energiser before working on the fence.
  • Do not touch live wires. Use a proper fence tester.
  • Keep warning signs visible.
  • Have a competent installer check the system regularly.

Get help

See our electric fence service. Pair it with cameras, see CCTV, and read about earthing.

Common questions

Can an electric fence be dangerous?

Properly installed energisers give a short, non-lethal pulse. Installation must follow safety standards.

Why does my fence alarm in the rain?

Wet vegetation or damaged insulators can leak current. Clear growth and replace damaged insulators.

How often should the fence be serviced?

Inspect regularly and service the system at least yearly.

Talk to a specialist

We'll answer your questions and quote for your site.