Networking
PoE Switch Explained: How to Choose One for CCTV Cameras and Wi-Fi Access Points
Short answer
A PoE switch sends power and data to cameras and access points over one network cable. Choose by the total PoE power budget, not just port count. For example, a switch with a 150 W budget can run about ten 15 W devices in theory, but you should keep a safety margin. Check the PoE standard each device needs.
Work out the power budget
- List each device and its maximum power (usually on the datasheet).
- Add them up.
- Add roughly 20% spare for safety.
- Choose a switch whose total PoE budget is above that figure.
Key specifications
| Spec | What to look for |
|---|---|
| PoE standard | 802.3af (up to 15.4 W), 802.3at (up to 30 W), 802.3bt for high-power devices |
| Total PoE budget | Must exceed the sum of your devices |
| Uplink | Gigabit copper or SFP fibre to the core switch or NVR |
| Managed or unmanaged | Managed allows VLANs and monitoring; unmanaged is simpler |
| Cable distance | About 100 m per run on Cat5e/Cat6 |
Tips
- Use quality copper cable, not copper-clad aluminium, for PoE runs.
- Put the switch on a UPS so cameras stay up during outages.
- Keep cameras on a separate VLAN for security.
See also
Read how to secure your office network and view our networking installations. Need help? See networking services.
Common questions
Can a PoE switch damage non-PoE devices?
Standards-compliant PoE only powers devices that request it, so ordinary devices are safe.
How many cameras can a 8-port PoE switch handle?
Up to seven or eight ports, subject to the power budget and uplink needs. Keep one port for the uplink.
Do I need a managed switch?
For small setups unmanaged is fine. Managed switches help in larger or shared networks.
